Shop

Description

Red optic sensor, register marks with \”Cut\” Support, cut plug-in for Corel DRAW.
Red optic sensor, register marks with \”Cut\” Support, cut plug-in for Corel DRAW. Aluminum alloy knurling feed rollers, leading shaft, high torque motor and micro-step driver locating system. With such a fast, accurate and versatile desktop cutting plotter, you can contour cut most any media pre-printed – from your choice of inkjet, solvent based and laser printer.

Dimensions:

Features:

– Low cost and high performance machine for the manufacture of signaling.

– Controlled by RISC high – speed processor, a high speed cache.

– Unique soft impact cutter for smooth cutting.

– It can regulate the pressure and speed numerically at real-time, which is very convenient and can be achieved fast.

– It has a perfect output: Theres no saw tooth even when using high speed.

– It supports direct cut-outs from `CorelDraw` 11, 12, X3.X4, X5, bringing great convenience to work.

– It has a stylish design and very solid support. It doesn\’t shake while cutting.

– The cutting plotter has LCD with a very accurate and simple English Menu, operated it by pressing buttons.

– The plotters pinch rollers are adjustable, so the paper stays in place when using rolls of media.

Components:

1. Protection of track 9. Knife holder

2. Carriage 10. Seat of knife holder

3. Pinch roller 11. Left shell

4. LCD monitor 12. Handle to control the roller

5. Keyboard panel 13. AC power port

6. LED lamp 14. Safe fuse

7. Right shell 15. Power switch

8. Machines foot 16. RS232 port

Locknut holder\’s shell close screw blade
On the working state, the knife can rotate in holder very smoothly. In the first time you can screw the \”close screw\” off the \”holder\’s shell\”, set the blade into bottom of holder, then close the \”close screw\” to avoid the knife falling out, let the knife peep out of the holder less than 0.5mm. When you want to change the blade, take out the old blade, change a new one, then close the\” close screw\”, keep the blade peep out of the holder less than 0.5mm. (The locknut will not screw, usually).

Close screw Holder shell Plotting pen.

You can use usual ball pen as plotting pen; keep the ball pen peep out of the holder between 4mm and 5mm. the other using method is similar as blade\’s process; please try it yourself according to the blade\’s changing method.

Applications

This cutting plotter is great for business usage; it is able to make any kind of design and it works faster and easier than other models. This machine can be used for stickers, glass decal, penaflex, vinyl decal, masking film for painting or etching, vinyl lettering, decorative scrapbook papers, card stock, stencils, magnetic sheets, etc. As well as all kinds of flexible heat transfer media like T – shirts, magic cut colored paper for garments, etc.

Blade holder and pen holder
The life of Blade:
The correct usage could prolong the life of blade.
(1) The more length the blade sharp extends out, the shorter life blade will work. So you should avoid cut through the paper.
(2) The more Force, the blade life will get short.
(3) Trying to use small Force, when the blade edge is getting less sharp, you could add the working force suitable.
(4) Different brand blades will have different life.
(5) You should change the blade when you find the old one has no tartness, to avoid affecting the work badly.